Voron 2.4 R2 Printed Parts

Voron 2.4 R2 , Functional or Complete printed parts

Includes all functional parts or complete and your choice of toolhead and control board bracket parts.

All parts printed in Polymaker ASA.

Print Settings

• Layer height: 0.2mm
• Extrusion width: 0.4mm, forced
• Infill percentage: 40%
• Infill type: cubic
• Wall count: 4
• Solid top/bottom layers: 5
• Supports: NONE

Primary color is always black, Contact us to request a different color.

Functional parts list:

Clips:
a]_z_belt_clip_lower_x4.stl
[a]_z_belt_clip_upper_x4.stl

AB Drive Units:
a_drive_frame_lower.stl
a_drive_frame_upper.stl
b_drive_frame_lower.stl
b_drive_frame_upper.stl
[a]_z_chain_retainer_bracket_x2.stl
[a]_cable_cover.stl

Front Idlers:
front_idler_left_lower.stl
front_idler_left_upper.stl
front_idler_right_lower.stl
front_idler_right_upper.stl
[a]_tensioner_left.stl
[a]_tensioner_right.stl

X-Carriage:
blower_housing_rear.stl
hotend_fan_mount.stl
probe_retainer_bracket.stl
x_carriage_frame_left.stl
x_carriage_frame_right.stl
x_carriage_pivot_block.stl
[a]_belt_clamp_x2.stl
[a]_blower_housing_front.stl

Z-Joints:
z_joint_lower_x4.stl
z_joint_upper_x4.stl
z_joint_upper_hall_effect.stl

Toolhead:
printhead_front_v6.stl
printhead_rear_v6.stl
chain_anchor.stl
extruder_body.stl
extruder_motor_plate.stl
latch_shuttle.stl
[a]_connector_cover.stl
[a]_guidler.stl
[a]_latch.stl

XY-Joints:
xy_joint_left_lower.stl
xy_joint_left_upper.stl
xy_joint_right_lower.stl
xy_joint_right_upper.stl
[a]_endstop_pod_hall_effect.stl
[a]_endstop_pod_microswitch.stl
[a]_xy_joint_cable_bridge_generic.stl
[a]_xy_joint_cable_bridge_igus.stl

Z-Drive:
z_drive_main_a_x2.stl
z_drive_main_b_x2.stl
z_drive_retainer_a_x2.stl
z_drive_retainer_b_x2.stl
z_motor_mount_a_x2.stl
z_motor_mount_b_x2.stl
z_chain_bottom_anchor.stl
z_chain_guide.stl
[a]_belt_tensioner_a_x2.stl
[a]_belt_tensioner_b_x2.stl
[a]_z_drive_baseplate_a_x2.stl
[a]_z_drive_baseplate_b_x2.stl

Z-Idlers:
z_tensioner_bracket_a_x2.stl
z_tensioner_bracket_b_x2.stl
[a]_z_tensioner_x4_9mm.stl

Miscellaneous:
nozzle_probe.stl
rail_installation_guide_center_x2.stl
bowen_retainer.stl
spool_holder.stl

Electronics Mounting:
plug_panel_filtered_mains.stl

DIN Brackets:
lrs_psu_bracket_clip.stl
raspberrypi_bracket.stl
rs25_psu_bracket_clip.stl
pcb_din_clip_x3.stl

Selection for Hotend parts:
E3D V6
Slice Mosquito
Triangle Labs dragon

Selection for MCU brackets:
Duet Duex
BTT SKR 1.3 / 1.4
BTT Octopus
Fysetc Spider